Skip to main content

Enerpac® TW6000EI ETW Electric Torque Wrench With 20 ft Servo Cord and NEMA 6-15 Plug, 1-1/2 in Drive, 6000 ft-lb Torque, 2.9 rpm Speed, 230 V AC

Image asset. Press spacebar to set to main image.

Description

Enerpac® Electric Torque Wrench, Tool, Series: ETW, 1-1/2 in Drive, Square Drive, 2.9 rpm Speed, 6000 ft-lb Torque, 230 V AC, 20 ft Servo Cord, Automatic Control

Enerpac® ETW series electric torque wrenches are particularly well suited to complex jobs which demand precision and traceability. The tools feature an automatic mode, which helps simplify and automate complex jobs, including those with torque and angle specifications, through the creation of presets. Using the touchscreen, simply input the number of fasteners and desired torque value for each fastening step, followed by the required angle of turn. This sequence may then be saved as an automatic preset for future use. Once the input torque is achieved, the tool stalls and a pass/fail indicator verifies that it is ready to move on to the next fastener. When the job is completed, the fastening record can be viewed on the touch screen or exported to a computer via a USB connection on the control box.

Specifications

Control Type Automatic
Cord Type 20 ft Servo
Drive Size 1-1/2 in
Drive Type Square
Series ETW
Speed 2.9 rpm
Tool/Kit Bare Tool
Torque Rating 6000 ft-lb
Voltage Rating 230 V AC

Includes: 20 ft Servo Cord

Warranty: Limited

Country of Origin: United States

Standards and Approvals: CE Certified, cCSAus Certified, FC Approved

Application:
For high volume fastening applications

Features

  • Wrenches and control boxes may be purchased separately or as a calibrated set
  • Control box required to operate wrench, electric torque wrench cannot be used without control box
  • Single control box may be used to operate multiple wrench models
  • Patented firmware design provides accurate fastening on soft or pre-tightened joints
  • High speed continuous rotation gets the job done faster
  • Torque and angle functionality allows input of nominal torque value followed by a specific angle of rotation
  • Pass/fail LED indicator on back of tool verifies fastening has been completed according to specified input
  • Controls on back of wrench enable operator to monitor and manage the fastening process without returning to the control box
  • Brightly lit three line LED display on wrench is easy to read in any environment
  • Fastening record can be viewed on screen and transferred to a computer
  • Each tool is performance tested and shipped complete with a factory calibration certificate
  • Lift points on wrench enable use with positioning handle or lifting device for greater handling safety
  • Ground fault detector protects operator in the event of insufficient grounding
  • Without control box

Resources




Related Items

Recently Viewed Items